Basic Tips On The Process Of Fire Damage Restoration

8 November 2017
 Categories: , Blog


When you have had a fire in your home, the possibility to repair the damage may seem overwhelming. This is because everything that came into contact with the fire and smoke may be wet, covered in soot and extremely damaged. However, if you took the time to go through the damaged area, you may find that quite a few of the items that were affected by water and soot can be recovered, repaired and/or restored. The process for fire damage restoration can take quite a bit of time, but the outcome will be well worth the commitment. The information listed below provides some basic tips on what's involved in fire damage restoration.

Damage To Interior Walls

When a fire happens, typically the smoke residue can spider out of control up and down the walls, leaving behind some form of damage. This could be soot covering the surface or extreme damage to the wallpaper and paint. However, depending on the level of damage, you can clean the surface using detergents, a bleach solution and a microfiber cloth. Soot is considered greasy and may require a scrub brush to help remove it from the walls. Once the walls are cleaned and dry, it may be necessary to remove any wallpaper and repaint the walls.

Mildew And Mold Growth

When you have a fire that requires excessive water to put it out, it's possible that you may end up with mold and mildew as a result. This is because the water may seep into the surfaces of your ceiling, walls, furniture, carpets and ventilation system. The moisture that builds up on these things can cause mold and mildew growth. When this happens, you may need to use a suction vacuum to pull out the moisture from the floors and furniture. In addition, the house should be aired out, vents cleaned and HVAC filters replaced.

Repairing Carpet And Floors

Most of the water used to put out a fire will end up getting absorbed into the fibers of your carpet. It's also possible that water will seep underneath vinyl or wood flooring, causing it to buckle and crack. When this happens, you may need to have the carpet removed, along with any damaged tiles and wood slacks.

There may be other areas in your home that will need to be restored or replaced after a fire. If you are unsure about the process, consider consulting with a restoration business such as Icon Property.